Because I don't sleep like normal humans, I went back over the Gen IV L96 source data and converted for the 8 kPa misalignment (408 - 488 kPa delta instead of 400 - 480). The Offset table is also adjusted to get rid of that 8 kPa misalignment. In reality that 8 kPa (1.16 PSI) error makes no difference, but hey. Boredom.
If you have a running, tuned build using the previous data don't use this (or maybe do, and then let me know if/how much anything was off afterwards?). But if you wanna be really particular and have one with these injectors that's yet to be tuned, use this instead.
P59 12613412 58psi non-referenced - refined.hpt
P59 12613412 58psi referenced - refined.hpt
As always my conversions are done manually using copy/paste and interpolation, and the conversion spreadsheet for the Short Pulse Adder table because I hate doing that one by hand. (https://forum.hptuners.com/showthrea...l=1#post700901)