Looking for any feedback on my first LS swap first start up. This is my first time doing an LQ4 6.0L swap into a 91 Camaro. I used a cam and LS6 intake from a 2005 CTS-V. I got the swap done and then almost immediately burnt up the 3-4 in the 4L60e trans. I just installed everything after rebuilding my first transmission. I have absolutely no idea I'm doing with tuning except to know enough to be dangerous. I'm using the original 2001 LQ4 tune with the following changes:
Copy from stock 2005 CTS-V
VE - 5.7L File
Idle Air - 5.7L File
Idle RPM Base - 5.7L File
MAF Calibration - 5.7L File
Injector Control Flow Rate - 5.7L File
RPM Cutoff - 5.7L
Spark tables - 5.7L
Segment swap 2001 Camaro 2.73 4L60E transmission and diagnostics
Updated Trans settings to 2002 Camaro (827922622.hpt)
From my limited knowledge, this seems like a good place to start as I learn more about tuning (I'm watching all the goat rope videos first). I drove the car for the first long drive while scanning. I guess my first question is if anyone can tell me if I'm doing anything that would be catastrophic for the engine. I've attached my files and would appreciate any feedback or warnings.
Thanks