Hello everyone, first post here and first time tuner. Just recently finished a LQ9/4l80e swap into an OBS Chevy and am ready to start tuning however the AEM wideband I got (30-0334) is not ALWAYS showing as a channel in VCM scanner when I start to record the log. I've converted it to serial data because it came with the OBD port for CAN, but my truck and ECU do not support CAN. I've played around with the PID and settings in the actual gauge and am still having issues. I just got it to work for one session but as soon as I cycled the key and tried again, it doesn't show. I've done some searching here on the forum and can't really find any solid information. I would greatly appreciate any help or any directions on what to try. Thank you!
I've added the channel in VCM Scanner as follows:
External Inputs>Serial Port>AEM>AEM AFR
Transform>Parameter>AEM-4110