was flashing a 2014 f150 today with a 5.0 and it failed. afterwards the motor will not start. i had a ford ids handy and it states the pcm is unprogrammed. i tried to write entire with hp tuners but it fails everytime. is there any old tricks in the book to try and get this pcm back to life or am i stuck with using ids and a vbf file?
Little update
It appears to fail around 40 percent and the dash gauges seem to flicker. Is this a loss of power or am I not staying in key on power? It seems like something is causing the truck to reset. Not sure if there is a relay I can hotwire temporarily to recover.
The software fails for transfer timeout