First, I checked fuses, battery and its new, relays not getting any clicking on them, everything and I have a new ECM with vats disabled. Changed my tune last night and only changed my MAP sensor to the correct setting. This is a new ECM after locking up my other several weeks ago! On my way to work was running VCM scanner when I parked VCM stopped scanning and the VCM software diapered (went off) on its own. Reloaded a later vers of tune and still nothing all light come on dash and go away before starting the car but won't start. Also, when I try to re-sync it says re-sync failed name revolution failed?