Well this is weird, out of nowhere my throttle has stopped opening fully it seems once the motor goes above 8100 RPM. Have not seen this till a day ago, it almost seems like it started after updating software to 5.1.1513
Is anyone else seeing this in the logs? Limiters are set to 8800, I've been running over 8400 RPM for a while but out of nowhere now the throttle starts closing/not opening it seems at around 8200. Throttle seems fine, if I do a launch it will go to 100 but then start to close back down, not seeing anything out of order in the logs, all numbers look good.
throttle1.PNG
throttle2.PNG