Setup is 2020 Camaro twin turbo, L8T crank, texas speed forged piston and rod, btr stage 1 cam with 38% fuel lobe, stock LT1 hpfp and injectors, aem 400 aux pump tying into factory line, deka 80 port injectors controlled by reflex plus controller.
Ive been chasing a lot of different things but recently started noticing issues with misfires in the higher load and boost. Looking at old logs there have been some but they've gotten way worse recently. Attached is a log of a pass at the track yesterday. I was hoping to get an 8 before the end of the year but that doesn't look like it's going to happen. I can take the engine apart and I probably will anyway just to go through it but I'm trying to figure out the actual cause before I do, put it back together and have the same issues. The main things I have done so far is, new plugs ltr7ix gapped at .022 and new ac delco wires. I've also been trying to throw more fuel at it. Tell me i'm an idiot, tell me i'm doing it all wrong, i don't care as long as it get's me closer to figuring it out.