where can I get on reasonable that will work on LM-1 and in my pillar pod??
where can I get on reasonable that will work on LM-1 and in my pillar pod??
Depends on your definition of "reasonable." I just installed my XD-1 this weekend along with a fuel pressure gauge...install was straighforward, and it certainly looks cool. It is really nice since it actually produces a number in addition to the lighted LED "needle".
If you don't want to spend that much, I think Dynotune makes one that just displays the number (no fancy light show). Not sure of its compatibility with the LM-1, but I'd think it would work with no issues.
You can get the gauges from http://www.carcustoms.net under the wideband section. You can also email [email protected] and ask him if he can get just the gauge...
2.4L Twin Cam Cavalier Z24 | T3 Super 60 @ 9 PSI | FMIC | TurboXS RFL | Greddy Profec B Spec II | Custom HO Intake Manifold | 2.5" Charge Pipes | 2.5" Downpipe | HP Tuners | 5 Speed Swap | Team Green LSD | SPEC Stage 3 Clutch | Fidanza Short Shifter | Prothane Control Arm Bushings | Carbon Fiber Hood
went to dynotune and bought a nice guage $99. I saw those last week but forgot who had them. thanks guys!
Let us know how you like it. The XD-1 is a bit pricey, but I really like how it turned out, and it works great. I really like that the colors are fully adjustable as well
is there any compatability issues when using autometer wideband afr guage with HPT? I bought one not really considering this to be an issue.
See this post about the AutoMeter.
Always Support Our Troops!
I just installed 3 gauges from speedhut.com. I'm really liking them and they work very well. Plus they are customizable and they recently released the wideband afr gauge. Check their site out!!!
Oh, forgot to mention, the wideband has presets for the LC-1
I'll post a pic (once I take one) of the 3 i got (2 1/16").
wb afr
oil pressure
fuel pressure
i'm also a tortured sol deciding on which wideband to orderOriginally Posted by ssnipes
AEM UEGO controller
AFX
INNOVATE
afx is cheapest @ $200 others $300 and $400 ??????
any rational basis for a choice would help me - the more i look the blonder i feel
thanks
pam
Just updated my website with the pic:Originally Posted by xonelith
Night one coming
http://ca.geocities.com/xonelith/mycar/pics/gauge_1.jpg
Heres mine: http://plxdevices.com/products_SMAFR.htmOriginally Posted by zzzybil
Less than $260 with gauge
2005 C-6
Specs:
- '05 Z51 'vette 'vert
- Z06 ass end
- MN6
- forged, stroked to a 404
- Procharger D1SC @ ~16 psi
- 235/242 614/624 115 lsa
- 83# Seimens injectors (with proper Banish info)
- 2.5 bar OS w/2.5 bar MAP
- twin walbros
- Kooks, 3", Corsa
- Meth
XON's gauges are "The Shit".........that looks freakin' awesome!!!! I used to like mine until I saw those(prick!!) But you can't buy 'em twice right?? So, do your homework and don't just get the ones that fit, make sure they fit you
Just checked out autometer and their WB gauges are for 0-4v input so be careful that way too, get the one that is right! I need a 0-5v input...
I just got the NGK AFX and it looks good so far!
Shipped fast and got what I ordered...
http://www.bmotorsports.com/shop/pro...0jgqhrnu0s09i7
Last edited by MMGT1; 02-28-2007 at 08:53 AM.