Wiring diagram For a ProLink+

[Rowse]

Good afternoon everyone,
I am after a wiring diagram for the MPVi2+ Prolink+ lead please.
Any help would be most appreciated.
Cheers,
Tim

[blindsquirrel]

Wiring is the same as the non-plus, right? And there is a pdf linked on the non-plus page?

[LilSick]

• Black – GND
• Red – Analog 1
• Blue – Analog 2
• Orange – CAN High
• Yellow – CAN Low

[TheMechanic]

Thanks

The CAN lines are not GM protocol.
It will work with AEM widebands with the proper firmware. Called AEMnet or something like that