Stock 2016 Yukon SLT XL 6 Speed AT Throttle, Cooling fan, speed & more..PLZ help😢😢
Hey..
Happy and glad to be with U all here..
Sorry my En is not that strong or good and also if I am writing in the wrong place..
I am new HP Tuner MPVI3 but had before 2011 Sierra 3500 HD Crew Cab and hope to get some help..
GMC 2016 Yukon XL 6S AT Stock Engine
Any one plz..have a look to attached word file..
Check the steps and answer the red writing if it possible and point any error and fix it
Thank u
6L80&Cooling Fan.pdf
Last edited by @Ahmed@; 02-06-2024 at 01:53 AM.
no one has even a reply??!!!
I uploaded 2 photos..
may someone look at it and tell me how to adjust the cooling fan at least
Last edited by @Ahmed@; 02-04-2024 at 01:39 AM.
Desired ect - set it to where you want the temperature to stay. Cooling fan is fan DC % for those given temps. AC is the same for AC KPA or line pressure, which goes up with temperature (both underhood and in operation)
Speed limiter is under speedo - don't go above 115mph - driveshafts go boom
2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80
~Greg Huggins~
Remote Tuning Available at gh[email protected]
Mobile Tuning Available for North Georgia and WNC
GHuggins
Thank u for replying ..I got a youtuber and I think I understood about setting the cooling fan but not sure if the modification I tried to do is right or not?
Would you plz have a look to the photo which I will upload tomorrow morning from my laptop
Have a nice day..
Reply With Quote