I have the opportunity to work on a LS swapped vehicle. Not new to this, but this time I am involved in picking the electronics, instead of working around what someone else has done. I would like to make my life easier and provide the best driving experience when it is all completed. I get to pick the ECM and the OS and the wiring harness will be built according to my request. I can flash the ECM with SPS, so no problems there. I just don't know of all the configurations GM had for the Gen 3 engines. The engine will be built as follows:
Gen3 6.0L (GMPP Crate LS364 to be exact)
Supercharged with an Edelbrock TVS2300
4L60 (2WD)
Drive by Wire
Is there a better/best ECU and OS that I should be using? Since he requests drive by wire, is there one that won't require a sperate TAC module?
Hopefully someone with more knowledge of all the gen3 computers/os combos will help me pick the right direction.