Hello, I'm at job lunch time. So I will post the tune file and the log by tonight here.
Setting are: PWN elec. and 128hz
Fan are : C7 Z06 600w
The problem described below are doing the same things for purpose information with my factory C6 Z06 Fan.
I have applied the 2 bar map patch years ago. But I'm still fighting the % fan commanded in the tune file vs the % desired in real life.
Lets say at 35% commanded at 73C cell, nothing happens. When I log, fan stay 0% at 73C. He start slowly increasin when he reach 76C or so which is the next cell.
If I put something like 70% at the 73C cell, it run like 28% or so. If I put 75% in the cell, it run like 34% or so.
If Ill go through the scanner, and commanding whatever number I want, the fan % desired and % actual follow inline what I'm commanding through the scanner buttons.
Do I have an operating system problems or can we have this work like a champ and the % commanded will be the % delivered at the temperature .
Best.