Super noob question and just joined this forum. And if this is in the wrong section please move it. I am getting away from EFI Live to go with HP tuners so PLEASE Bare with me. I am purchasing the MPVI3 and the Prolink cable, I already have an AEM 30-0334 wideband still in the box. My tuning guy i will use asked me to make sure that the 0-5v wires are wired to the prolink, My question is do I take the 0-5v analog + and - wires and wire them into the prolink with the passthrough wired for power and ground and plugged into ODBII port. Please explain the steps I need to take to make this work so I can datalog to get my remote tune. My Truck is a 2014 Silverado 5.3 with TVS1900 and a awfly tuned 6l80E and circle D converter. The Widband will only be used for datalogging and removed when finished. Ask all the questions you want and I will try to answer them if I can. Thanks Robert