Hi, I'm completely new to programming, but have over 20 year exp as a Diesel Mechanic and Marine Engineer.
I've got a pet project I'm starting. That is putting a 2008 LMM duramax into a boat. I'm going to run with a full manual,2 speed power glide (without torque convertor) and a surface drive....
455hp with this configuration should have me up around the 90Mph mark.
I really want to get into the programming side, but The thing is I'm a bit in the dark as to where I should go with software.
The 1st thing I want to do is do the softwear changes that will let me get rid of any unwanted codes due to not running the Allison and all the rest of the Controllers (TCM, BCM etc). I'll have a stand a lone harness.
I don't want to go silly on bumping up the HP, 90+ over standard will be more than enough. (I'm happy to run with the 365hp for a start... but I would like to learn and play)
There is a lot of info at EFIlive
It looks pretty good here at HPT as well.
I haven't purchased softwear yet (I'll be doing that in the next week or so)
Guess I'm just looking for some positive feed back towards this product and tuning LMM 2008 dmax's