So when tuning my Outlander I found that the last right cell causes the PCM to limit the RPM of the engine at 1400 RPM.
47258 - Torque Limitation for Battery Voltage, Variant 0
Outlander TQ limt.png
47259 - Torque Limitation for Battery Voltage, Variant 1
brp - 47259.png
These are the best values Ive found to work at this point.
I think that last line is for something else and doesnt belong in that table. Even though its right in line with it in the Hex Addressing. Notice the RPM value is way out of whack.
I have re mapped most all of the tables to 9000 RPM