I'm really stumped: as I feed throttle, the ETC Torque Request stops tracking the Driver Demand Table and starts exceeding driver demand significantly. I'm not sure where it's getting the values it's trying to hit. Driver demand isn't much higher, yet the "ETC Torque Request" exceeds driver demand by about 50 lb-ft after tracking it quite well.
You can see in the log where the throttle body angle stops following the pedal and starts waaaaaay exceeding pedal angle.
I can't figure out why it starts doing this!
Attached is a log snippet showing the issue and my tune file. Any help is appreciated!
Screenshot 2024-04-28 at 11.22.48 AM.png
2018 Mustang GT Vortech 057 85% of Driver Demand.hpt
24-04-28 ETC Torque Exceeds Driver Demand.hpl