Hello, i am VERY new to tuning. This is my first tune. I have read a ton, watched a thousand videos and worked with the VCM software. I have attached 3 tunes and a log. The tune that reads "final injector" is the one running in the Jeep now and the log is from that tune. It is a tune for 2 bar MAP sensor and 42lb DeatchWerks injectors. It seems to be running great but another set of eyes on it would be appreciated.
The bigger issue is the tune that is labeled "Final injector tune PE, VE and spark". I am planning on using this tune as a starting point to tune my Jeep 3.8 for a turbo set up with 7 psi boost. Any and all advise on changes and improvements would be greatly appreciated.