-
Potential Tuner
Pro Link analog inputs not recording in Chart vs Time
I have installed Pro Link/Pro Features for the MPVI2. I am using the 2 analog inputs to log 2 pressure sensors. I am able to see these 2 inputs in the Channels window, and they display data correctly. I can add the two channels to the Chart vs Time window but they don't display any data there.
Any suggestions?
-
Advanced Tuner
Do you have the correct unit of measurement in the Chart vs Time for whatever you are logging.
What I mean is lets say you are logging STFT, you have to select the unit as % to get it to show up.
If you are logging Lambda for example, the unit needs to be Lambda not AFR.
I hope some of this makes sense.
-
Tuner in Training
have you figure out? I got the same issue right now.
-
Tuner in Training
I figured out.
the air fuel ratio for my wb don't read anything, until I used equivalence ratio. But now the issue was my commanded is only in AFR.
I used math - user -to convert commanded AFR to lambda
-for the MAF calibration formula
Attachment 146141Attachment 146142Attachment 146143Attachment 146144Attachment 146145