Hi Everyone, im kinda struggling to tune my srt8 Challenger after a cam swap. The Car is a 2011 Challenger srt8 with the 6.4. As far as engine work goes, i went with a BTR Truck Norris camshaft 212/230 duration .587/.586 lift 109.5 LSA. BTR 6.4 beehive springs, mopar non mds lifters, btr chromoly pushrods, 4 degree vvt limiter, melling 10425hv oil pump, new timing set. The OEM heads have been ported, valves were cleaned and lapped and verified for sealing. obviously all gaskets and seals have been replaced too. other then that just simple things like a ported throttle body, cold air intake, exhaust, and catchcan.
Anyways ive done some tuning before but i am still new at it and this is my first dodge as opposed to a gm. so naturally this crap is confusing as hell lol.
so far ive gotten it to the point where it will idle and drive but cold starts are a struggle and it is down on power, i havent messed with the fueling yet since to be perfectly honest i dont know how with these dodges. i know the idle is rich as a pig. really absolutely any advice yall have would be great. ill post my tune file as soon as i can for yall to go through.