2017 CTS-V LT4 E92 ECM.
Installed a NW TB 103mm, what do I need to configure in hptuner?
I only find "Throttle Area Limits" in hptuner, which I should leave as is, or?
2017 CTS-V LT4 E92 ECM.
Installed a NW TB 103mm, what do I need to configure in hptuner?
I only find "Throttle Area Limits" in hptuner, which I should leave as is, or?
Don't change the throttle max. As long as it was for a gen V, Nick has configured those TB's to flow the same as an LT1 stock TB up to about 30% where you do most of your driving. Just dial in your MAF, VE and DD tables.
2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80
~Greg Huggins~
Remote Tuning Available at gh[email protected]
Mobile Tuning Available for North Georgia and WNC
On that model car. You do not need to make any changes. It might make some more boost and need fueling/spark changes.. but nothing like the old days with big throttle bodies and ETC scalars.
Tuner at PCMofnc.com
Email tuning!!!, Mail order, Dyno tuning, Performance Parts, Electric Fan Kits, 4l80e swap harnesses, 6l80 -> 4l80e conversion harnesses, Installs
Thank's.
I have calibrated the MAF after installed rotofab big gulp, any tips or guide/links to do the VE and DD tables?