2020 Mustang GT, 10R80 originally. Also, originally standard (not active) exhaust and standard (not digital) dash. Car has a vortech and tuned by one of the name brands, using the HPtuner. Before with the 10r80 the AE worked with drive modes and with the menus in the digital dash. I swapped to a TH400, tuner I think changes PCM to manual to get the TH400 to work. I sent my digital dash off to get programmed for the manual (TH400), all that works. At first I had no menus, activated the stuff in forscan. I have menus now, but selecting the different exhaust modes does nothing. The exhaust is always wide open, I cannot control it like I could in the past. I tried setting up the auto modes where it would put it in quiet mode at start up, I can set it up but no change; always wide open. Is there something different I need to do to get the AE to work since they flashed it to a manual to get the TH400 to work?