Hi,
I'm running an E38 ECM on a 2014 camaro SS, LS3 6 spd manual. I can not get it to give me the three VE tables I'm supposed to get with the OS change, and I still have to make changes to the VVE from the edit dropdown. The only thing that changed was my "Main Operating System" CVN (not ID) changed from 0F74 to E489.
I thought I followed the correct procedure as follows:
-Open a tune without the "speed density air mode" applied
-Click on OS
-click the dropdown next to "speed density air mode" and click "applied"
-Make no other changes
-Save as, then give a unique file name, hit OK.
-Close the file
-Open the file
-Flash vehicle using the write entire option, takes 6 mins.
-Key off, open door, close door, key on, Read entire.
At this point the Read file should have the new VE tables that are populated with zeros that I must fill out, but I don't.
Anybody know how to get these VE tables on the gen 4 platform on the 5th gen camaro? Or are we stuck with VVE?
Edit: attached my current tune file. Sorry for not attaching it.
Thanks!!
240518_SDOS_OS_100NOS_timing.hpt