I've been struggling to find (maybe understand) applicable filters for Gen V. I've been using TitanTuned filters.
Code:
MAF DYNAMIC AIR OPEN LOOP
[50070.56]>2500 AND (ABS([50040.71]-[50040.71.shift(-10)]) <([50040.71]/[50040.71.shift(-10)])*0.1 & ABS([2311.71]-[2311.71.shift(-10)]) < ([2311.71]/[2311.71.shift(-10)])*0.1) OR ([50090.156] > 50 & [50030.91] > 60 & ABS([50030.91]-[50030.91.shift(-10)]) < ([50030.91]/[50030.91.shift(-10)])*0.1)
MAF DYNAMIC AIR CLOSED LOOP STFT
[50070.56]<2500 AND ABS([50040.71]-[50040.71.shift(-10)]) < ([50040.71]/[50040.71.shift(-10)])*0.1 & ABS([2311.71]-[2311.71.shift(-10)]) < ([2311.71]/[2311.71.shift(-10)])*0.1
VVE DYNAMIC AIR OPEN LOOP
[50070.56]>2500 AND (ABS([50040.71]-[50040.71.shift(-10)]) < ([50040.71]/[50040.71.shift(-10)])*0.1 & ABS([2311.71]-[2311.71.shift(-10)]) < ([2311.71]/[2311.71.shift(-10)])*0.1) OR ([50090.156] > 75 & [50030.91] > 80 & ABS([50030.91]-[50030.91.shift(-10)]) < ([50030.91]/[50030.91.shift(-10)])*0.1)
VVE DYNAMIC AIR CLOSED LOOP
[50070.56]<2500 AND ABS([50040.71]-[50040.71.shift(-10)]) < ([50040.71]/[50040.71.shift(-10)])*0.1 & ABS([2311.71]-[2311.71.shift(-10)]) < ([2311.71]/[2311.71.shift(-10)])*0.1
I just didn't like how he filtered for Closed Loop and PE so I expanded on his filters to fit my Power Enrich Enable Pedal table.
Screenshot 2024-05-06 173855.png
Code:
MAF CL
[50091.156] > 0 AND ((([50070.56]<2048 AND [50090.156]<70]) OR ([50070.56]<2560 AND [50090.156]<65]) OR ([50070.56]<3072 AND [50090.156]<45]) OR ([50070.56]<3584 AND [50090.156]<37]) OR ([50070.56]<4096 AND [50090.156]<28]) OR ([50070.56]<4608 AND [50090.156]<25])) AND ABS([50040.71]-[50040.71.shift(-10)]) < ([50040.71]/[50040.71.shift(-10)])*0.1 & ABS([2311.71]-[2311.71.shift(-10)]) < ([2311.71]/[2311.71.shift(-10)])*0.1)
MAF PE
[50091.156] > 0 AND ((([50070.56]>2047 AND [50090.156]>69]) OR ([50070.56]>2559 AND [50090.156]>64]) OR ([50070.56]>3071 AND [50090.156]>44]) OR ([50070.56]>3583 AND [50090.156]>36]) OR ([50070.56]>4095 AND [50090.156]>27]) OR ([50070.56]>4607 AND [50090.156]>24])) AND (ABS([50040.71]-[50040.71.shift(-10)]) <([50040.71]/[50040.71.shift(-10)])*0.1 & ABS([2311.71]-[2311.71.shift(-10)]) < ([2311.71]/[2311.71.shift(-10)])*0.1) OR ([50090.156] > 50 & [50030.91] > 60 & ABS([50030.91]-[50030.91.shift(-10)]) < ([50030.91]/[50030.91.shift(-10)])*0.1))
VVE CL
[50091.156] > 0 AND ((([50070.56]<2048 AND [50090.156]<70]) OR ([50070.56]<2560 AND [50090.156]<65]) OR ([50070.56]<3072 AND [50090.156]<45]) OR ([50070.56]<3584 AND [50090.156]<37]) OR ([50070.56]<4096 AND [50090.156]<28]) OR ([50070.56]<4608 AND [50090.156]<25])) AND ABS([50040.71]-[50040.71.shift(-10)]) < ([50040.71]/[50040.71.shift(-10)])*0.1 & ABS([2311.71]-[2311.71.shift(-10)]) < ([2311.71]/[2311.71.shift(-10)])*0.1)
VVE PE Lambda
[50091.156] > 0 AND ((([50070.56]>2047 AND [50090.156]>69]) OR ([50070.56]>2559 AND [50090.156]>64]) OR ([50070.56]>3071 AND [50090.156]>44]) OR ([50070.56]>3583 AND [50090.156]>36]) OR ([50070.56]>4095 AND [50090.156]>27]) OR ([50070.56]>4607 AND [50090.156]>24])) AND (ABS([50040.71]-[50040.71.shift(-10)]) < ([50040.71]/[50040.71.shift(-10)])*0.1 & ABS([2311.71]-[2311.71.shift(-10)]) < ([2311.71]/[2311.71.shift(-10)])*0.1) OR ([50090.156] > 25 & [50030.91] > 80 & ABS([50030.91]-[50030.91.shift(-10)]) < ([50030.91]/[50030.91.shift(-10)])*0.1))
Should I remove the
Code:
OR ([50090.156] > 25 & [50030.91] > 80 & ABS([50030.91]-[50030.91.shift(-10)]) < ([50030.91]/[50030.91.shift(-10)])*0.1)
from the open loop filters because my PE pedal enable section of the filter already covers it?