So I have a swapped E46 with a 5.3, small cam, headers, yada yada.... I swapped in some 412 injectors on a 0411 pcm and attempted to understand the conversion that has been posted by top guys in here.... I have to have gotten pretty close with it (forgive the ignorance) because the car starts, got it to idle and it runs.... the problem that Im looking at is that with the bigger injectors the ve table is showing like 80's and 90's at idle to get a 14-15 afr idle.... just wondering if someone could take a peek at the injector data in my tune and tell me whats off.... its a corvette fuel pressure regulator and the rail is showing 58ish psi.... thanks in advance Im just kinda lost