-
Tuner in Training
Trans Current Gear PID e38/6l80 - reading in channels list but not graph or chart
I'm having some trouble with logging my transmission current gear [50072]. In the channel list in the scanner, I can see 'Trans Current Gear' and it lists everything appropriately from park through to gears 1-6. However, trying to log it in a graph, use it in a filter or put it on the chart gives me no data. It is 'red' when trying to make a math parameter, for example.
Can anyone suggest what I'm doing wrong? I've attached a small log going through the gears as an example of the log recording what gear the car is in but I can't seem to translate that to graphs/maths.
Thank you!
TransCurrentGear.hpl
-
You can't use that parameter how you would like because it's an enumeration. There's another trans gear pid in there somewhere, use that one.
-
Tuner in Training
Sorry, slow to understand. If I manually add a variable in the math parameter manager, for example and search for transmission gear, this is the ID it gives me. Even if I dont use the generic sensor (which is 50072) the specific [4120] still returns red.
However my channel list correctly displays the current gear - so I guess my question is, how do I translate channel list to parameter in this case. Thanks
-
You can't.
You need to add the other trans gear channel to your channels list.
-
Tuner in Training
Understand now, thanks. I'll give it a go and report back.
-
Tuner in Training
Thanks so much @hjtrbo
I can see now that when adding a PID to the channel list, it will tell me what sensor it's using too. Got it working now!