I have a 2002 c5 with a Gen3 MAF sensor, Gen4 MAP sensor with a LS2 throttle body and LS3 engine with all Racetronix wiring harnesses for the conversion.
Anyhow I see on the HP Scan my MAF Intake air temps reading -38F and not moving, key on eng off and running.
Is there a MAF test or a change I can do to rectify this? THX !!!Intake Air Temp LOW engine running no changes.hpl
I attached the scan file below.............
Last edited by PBRstreetgang; 1 Week Ago at 10:30 AM.
That's an open circuit reading. Broken wire, bad pin in the connector, etc.
EFI specialist
Advanced diagnostics, tuning, emissions
HPtuners dealer and tech support
email=[email protected]
Well how the heck are you supposed to fix something like that?!Originally Posted by edcmat-l1
looks-good-to-me.jpgWell how the heck are you supposed to fix something like that?!
EFI specialist
Advanced diagnostics, tuning, emissions
HPtuners dealer and tech support
email=[email protected]
Thats what they will read unplugged.
Tuner at PCMofnc.com
Email tuning!!!, Mail order, Dyno tuning, Performance Parts, Electric Fan Kits, 4l80e swap harnesses, 6l80 -> 4l80e conversion harnesses, Installs
Reply With Quote