I'm working on my bros car and it lost communication with the tcm, trying to figure out where the power to the tcm comes from, i've looked everywhere and cant fin a diagram. your help is appreciated!!!
I'm working on my bros car and it lost communication with the tcm, trying to figure out where the power to the tcm comes from, i've looked everywhere and cant fin a diagram. your help is appreciated!!!
what kind of car or truck is the transmission in?
2012 chrysler 300 awd! thanks for the reply bro.
should have a yellow/red wire coming from the TIPM. Its fuse 57 on my truck, not sure which on yours but should be labeled on the TIPM cover. Its a 20 Amp fuse. And then you will also have a Pink/White wire in the tcm plug for Ignition Run/Start Control which is coming from the BCM. Aside from those two wires, you should just have a ground wire (Black) and 2 canbus wires (Violet/White and Yellow), 2 data bus wires (White/Brown and White/Orange), and finally a transmission park signal wire. Mine is Yellow/Dark Blue and comes from my Radio Frequency Hub mounted on the rear cab wall right in the middle behind the console splitting the 2 rear seats. Those are the 8 wires you need to control the trans/tcm.
"1MEAN16" Silver/Black 2016 Ram CCSB (4592lbs) NA 398ci Stroker
+6cc Mahle Dome Pistons w/ 13.1/1 Compression on E85
Forged 4.08" Stroke Crank, 224cc AFR Heads w/ Titanium 2.165"/1.65" Valves
Custom Cam 220/238 .611/.589 108.5 LSA 108.5 ICL, 105mm Hellcat TB
Ported Hi-Ram Intake, NXpress Hi-Ram NO2 Plate kit w/125 Shot(4 sec)
Tx Spd 2" Long Tubes, ATI SD 15%UD, Ram TRX K&N CAI
Dual 450 Pumps, Deatschwerks 1000cc Inj, Fuel Cell in Bed
Built 8HP70 w/ 3800 stall/Detroit Tru-Trac/410 Gears
Reply With Quote