Results 1 to 5 of 5

Thread: Anyone willing to take a look at my tune and advise me a bit

  1. #1
    Potential Tuner
    Join Date
    Oct 2020
    Posts
    6

    Anyone willing to take a look at my tune and advise me a bit

    Im very new to tuning my 5th gen lt. I have a btr 220 cam, intake, and long tubes and currently on e85 mix. Id greatly appreciate any info or help on anything I may be doing wrong or could improve on. I believe my idle is still pretty bad but other than that the car seems fairly happy.
    GOOD RUNNING TUNE W DFCO.hpt
    9.17.24 9pm.hpl

  2. #2
    Tuner Alex14SS's Avatar
    Join Date
    Aug 2021
    Location
    Florida
    Posts
    112
    Could use some more fuel and more air... everything seems okay for the most part. No torque management at all is all i really see done here. You got soe decent power still sitting there even with that beind disabled.
    Buy tunes here! GM DODGE FORD > https://tunedbyroleari.sell.app/
    Follow me on Instagram > https://www.instagram.com/alexchutini/

  3. #3
    Potential Tuner cs25tex@aol.com's Avatar
    Join Date
    Feb 2023
    Location
    Princeton, Texas
    Posts
    1
    You should log VE Air (grams per sec) and Dynamic Air flow (g/s) in your channels and chart vs time so you can compare those with your MAF (g/s) and try to make all three match.

  4. #4
    Potential Tuner
    Join Date
    Oct 2020
    Posts
    6
    Could you give me a basic rundown of the vt adjustment. i tried just take it up and down 10% and it was fine at idle but any driving it killed the car.

  5. #5
    Potential Tuner
    Join Date
    Oct 2020
    Posts
    6
    Thank you i will do that