No MAF Freq in scanner

[vthex]

so i had a rough idle and stall, read code p1101, simply took out maf cleaned it and put it back in, no p1101, can read iat and flow rate, but i cant read frequency, the maf by eq error table just goes to 0 hz column and wont change,
idle is alot better but still a bit of stutter but nothing massive, ltft is slightly lean on idle but thats not a major issue, i already tried to force it in maf and beside the idle getting worse its pretty fine, i already deleted the os file and re scanned the channels, nothing, i cant find anything on this. should i just go SD atp? or buy another maf?



2.0 LTG, E80a, cai, catless

[vthex]

Problem solved,

so i eventually came to the conclusion it was an exhaust leak, turns out i forgot to plug extra w/b sensor hole with a plug after using it to connect to a temp afr gauge ,
checked everywhere but the most obvious place

i spent the whole day on this...