I have map sensor 12580698, I followed the demo steps to set up the boost ve, etc. I have 60# injectors which calced to 69-74 so I put 63.49 in all cells for the INJ flow vs kpa table. I have no MAF and a separate IAT sensor. The car is essentially stock save the twin turbos and supporting mods (valve springs, push rods, lq9 heads, pump, injectors) The map sensor never reads above 105 in the scanner. The boost VE table never gets out of the first column. When the sensor should read over 105, the car shuts down.
Reply With Quote
