Results 1 to 3 of 3

Thread: 2017 Seat Leon 1.4 support

  1. #1
    Advanced Tuner
    Join Date
    May 2024
    Posts
    200

    2017 Seat Leon 1.4 support

    Ive tried reading my seat with the 1.4 ts(f)i engine, but HPT do not reconice it. what do i need to do to get support? Its the same engine i 8+% of the 1.4 Vw group cars including Audi and the likes.
    It also have the DQ200 DSG boxthat hpt can't read either..

  2. #2
    I'd recommend setting up a support ticket for the ECU but DQ200 isn't supported at all if you look at the supported vehicle list.

  3. #3
    Potential Tuner
    Join Date
    Jan 2025
    Posts
    6

    this is the stock tune

    gti stock tune.hpt




    have Forged H-Beam connecting rods
    144x20mm forged H-beam ,
    JE Forged Piston Set
    82.5mm bore (standard), 9.1:1 compression ratio, 92.8mm stroke
    Calico Coated ACL Race Main Bearing Set - Standard Clearance
    Calico Coated ACL Race Rod Bearing Set - Standard Clearance
    Lightweight Underdrive Crank Pulley Kit
    2.0T FSI / 2.0 TSI Aluminum Intake Manifold
    K04 F23T Turbocharger Manifold (Billet Compressor Wheel 62mm)
    STAGE 3R CLUTCH KIT+PROLITE FLYWHEEL
    intake air filter K/N