Misfire help

[DavidRempel]

I put a ghost cam tune on a 2019 F150 5.0 a few weeks ago. Today it got a misfire code. It seems to be running fine.

I was wondering if there was any way to desensitize misfire codes just at low rpm?

I did find a table for misfire sensitivity on the tune but I?m not quite understanding how to adjust to lower sensitivity

[Advobeast]

I put a ghost cam tune on a 2019 F150 5.0 a few weeks ago. Today it got a misfire code. It seems to be running fine.

I was wondering if there was any way to desensitize misfire codes just at low rpm?

I did find a table for misfire sensitivity on the tune but I?m not quite understanding how to adjust to lower sensitivity

ECM 39204 allows you to set a minimum allowed load. You can log your load at idle and then set the minimum allowed load just a little higher than your log. I haven't tried this myself, but it looks like this should work.

[RRTuning806]

i got a new account but thank you. i tried that and it is working so far