New Code Patch - PATS Disable

[Eric@HPTuners]

Will be in all 2018-2023 factory strategies by the end of the day with more to come.
PATS.jpg

[onefastt]

@eric@hptuners How long before we get as patch for Gen 1 ecus? Need one deleted for a project i'm working on.

[Bnelson]

Awesome!

[Pistol_91]

Awesome thank you

[Cgiles01]

heck yeah cant wait for the 11-14 f150 and 15-17 f150 ones!

[Eric@HPTuners]

Adding em as fast as I can, going from newest to oldest.

[onefastt]

Thank you Eric.

[Eric@HPTuners]

Update: the following have the patch now.

2015-2022 Mustang GT
2015-2022 F-150
2020+ GT500

On the 15-17 vehicles, there is a central config reset in VCM Scanner that has to happen after you flash the patch in.

[B E N]

Amazing stuff, great job!

[Advobeast]

Update: the following have the patch now.

2015-2022 Mustang GT
2015-2022 F-150
2020+ GT500

On the 15-17 vehicles, there is a central config reset in VCM Scanner that has to happen after you flash the patch in.

What exactly do we need to do?

[onefastt]

Its shown in this very first post. Click the OS button and apply the patch.

[Advobeast]

Its shown in this very first post. Click the OS button and apply the patch.

I was referring to the central config reset for the Scanner.

[Paul b]

So does this disable PATS?

[Advobeast]

So does this disable PATS?

Yes sir! Just used this today on a Gen 2. Worked like a champ!

[onefastt]

Update: the following have the patch now.

2015-2022 Mustang GT
2015-2022 F-150
2020+ GT500

On the 15-17 vehicles, there is a central config reset in VCM Scanner that has to happen after you flash the patch in.

Eric any update on when the Gen 1 ecus will be supported? I need to delete the PATS on a Gen 1 ecu that I have a license for. Trying to decide if I'm going to send it off or hold out for the functionality on the Copperhead ECU if it will be near term.

Thank you in advance.

[Eric@HPTuners]

Attach the file and I'll add the patch for it. I have already added it for 2013-2014 GT500 Copperhead.

[onefastt]

Attach the file and I'll add the patch for it. I have already added it for 2013-2014 GT500 Copperhead.

truck tune stock copperhead.hpt

[Eric@HPTuners]

Use the attached file. Do a write entire. Afterward, check if it starts. Also log torque source. Report back the result please.

[onefastt]

Ok thank you Eric. I will report back.

[TooSlo86]

Hey Eric, I used the patch code on an F150 pcm last week, and am attempting to do so on a new 2017 Mustang GT pcm. The patch code is not showing. Thanks

STOCK READ.hpt