Can any point me in the right direction as to improving the shifts when using launch control. The car does does nice firm shifts at wot in auto and manual modes but the shifts are "soft" and I have too much "slip" on shifts when using LC
In the log the first launch is just a WOT drive away and the second launch is when LC is used.
what's the goal, to get LC shifts like normal shifts? That is perfectly normal though, in LC it engages AMAX mode and it shifts without any sort of fuel cut for fastest possible acceleration and slips the clutches some
To go to the drag strip. with the increased power i would like to reduce the slip on shifts when LC is used.Originally Posted by aaronc7
Where do I find the AMAX mode? can I tune out the slip or can I disable it and still use LC?
Last edited by rot62; 02-02-2025 at 11:46 PM.
try these files if you like. 5 attempts to avoid amax shifts by setting the tune to require kickdown. so, stay out of kickdown and give it a go.
6 disables an amax master toggle to take it a step further if above doesnt work at all. I think 5 might be ideal-- you can still use amax mode if you want to by pressing the kickdown.
Reply With Quote