Gen3 Disable CSER / emissions Reduction

[Quicksand Jesus]

Good day, everyone.

I'm interested in what it takes to disable CSER and all emission reduction on a Gen3. I'm working on a drag car (no VCT, custom cam, motor, etc.), which causes the car to start improperly and idle when CSER or emissions reduction mode is active. I've accomplished this before on Gen1 and Gen2, but raising the emissions timing tables does not seem to have an effect. Any pointers would be greatly appreciated.

[Pistol_91]

38170 zero out table. Should quickly go to OS

[veeefour]

38170 zero out table. Should quickly go to OS

This will only disable VCT side, few more to change to disable cser tq interventions

[Quicksand Jesus]

I set the spark tables to 55. I also put the TQ Clip to 1 and made the CSER lower .8. I'll try it out when I'm back on Friday......fingers crossed!

[engineermike]

Yep, ecm 11535 to 55 and 44893 to 1.0.