Results 1 to 5 of 5

Thread: 2000 7.3L SCT Tune

  1. #1
    Tuner in Training
    Join Date
    Oct 2024
    Posts
    30

    2000 7.3L SCT Tune

    I got a 2000 F-250 with a VIN that ends with SCT! and I think it is causing communication issues with the mvpi3 controller and regular OBD2 diagnostic computers. Is there anyway to revert this VIN back to factory?
    Thanks

  2. #2
    Tuner in Training
    Join Date
    Oct 2024
    Posts
    30
    Quote Originally Posted by Adammm57 View Post
    I got a 2000 F-250 with a VIN that ends with SCT! and I think it is causing communication issues with the mvpi3 controller and regular OBD2 diagnostic computers. Is there anyway to revert this VIN back to factory?
    Thanks
    It has a 7.3L powerstroke in it.

  3. #3
    Potential Tuner MisfTuning's Avatar
    Join Date
    Aug 2019
    Location
    Minnesota
    Posts
    3
    delete the SCT tune thats flashed to the ECU, like blessed performance they lock and utter the ECU useless to any other tuning platform ran into the same issue with my buddies 6.0

    Hope this helps
    2004 Mustang Cobra Gen2 Whipple
    EEC-V ECU
    Device: MPVI2

  4. #4
    Tuner in Training
    Join Date
    Oct 2024
    Posts
    30
    So just flash it over with a stock tune using hp tuners? If so I need that stock tune.

  5. #5
    Senior Tuner 04silverado6.0's Avatar
    Join Date
    Sep 2021
    Location
    Kentucky
    Posts
    1,848
    Im 90% sure you will need to use the sct device to revert to stock or get a new ecm. Hptuners cannot write over a vin it cannot license. Plus the whole tunerlock ordeal.