New Code Patch - PATS Disable

[Eric@HPTuners]

Hey Eric, I used the patch code on an F150 pcm last week, and am attempting to do so on a new 2017 Mustang GT pcm. The patch code is not showing. Thanks

Attachment 157490

This is a Ford Racing/Whipple/Roush cal. I haven't done those yet. You can flash a stock file in, apply the patch, do the central config relearn to kill pats, then write this cal in with the pats switch set to disabled and it will work.

[TooSlo86]

This is a Ford Racing/Whipple/Roush cal. I haven't done those yet. You can flash a stock file in, apply the patch, do the central config relearn to kill pats, then write this cal in with the pats switch set to disabled and it will work.

Of course my luck gets me something other than a stock pcm from the wrecking yard lol. I just wanted a stock Gen2/manual pcm. Even if I just do a write entire using a stock 6spd OS I'd still have to license this one, just to cover it up with another two credits to license the stock OS. If it's not far on the horizon I can just wait until you have this OS done.

Thanks

[Kevin@KMR]

Update: the following have the patch now.

2015-2022 Mustang GT
2015-2022 F-150
2020+ GT500

On the 15-17 vehicles, there is a central config reset in VCM Scanner that has to happen after you flash the patch in.

Eric, is this safe to apply with an RTD file? I have one I'm working on remotely.

Thanks!
Kevin

[Eric@HPTuners]

Yeah.

[Eric@HPTuners]

All 298 and 298B 7.3L and 6.2L now have the patch.

[Eric@HPTuners]

Copperhead based Mustang GT, GT500, and F-150 5.0L are now done. Download latest beta.

[Eric@HPTuners]

Boss 302 (incl. Trackey) and 6.2L Raptors are done

[Lost0187]

Thank you guys for all your hard work you make tuning enjoyable still trying to get the read of the 2003 Lincoln Aviator 4.6 4v been sending info logs annd .DAT files but still no luck. Next I plan to pull the PCM and attempt a bench read to see if that works. Had you guys set it up as a Black Oak controller similar to the Lincoln LS but one thing I noticed is the Aviator doesn't have a CAN Bus set up but uses the older SCP Bus for communications.

[Eric@HPTuners]

Thank you guys for all your hard work you make tuning enjoyable still trying to get the read of the 2003 Lincoln Aviator 4.6 4v been sending info logs annd .DAT files but still no luck. Next I plan to pull the PCM and attempt a bench read to see if that works. Had you guys set it up as a Black Oak controller similar to the Lincoln LS but one thing I noticed is the Aviator doesn't have a CAN Bus set up but uses the older SCP Bus for communications.

If its the SCP Black Oak, we do not currently support, but we are looking into adding it.

[Lost0187]

I will pull the PCM and see if I can get a read on the bench set up. If I cant pull the read Ill try to put the can + - lines in the PCM and see if the read is possible the pins aren't being used in the PCM so Ill try to do what I can to help you guys getting a file.

[SuperDuty6.2L]

Awesome, thank you!

[Zerorain87]

I know its not as desired as all the other ecu but will the pats patch be rolling out anytime soon for the 2014 ford 2.5?

[Eric@HPTuners]

I know its not as desired as all the other ecu but will the pats patch be rolling out anytime soon for the 2014 ford 2.5?

Whats the strategy and I'll add it. I can do one pretty quick, but to do all of them will take a bit of time.

[Zerorain87]

I believe that to be the "operating system" and that's CDFQ2A5

[Eric@HPTuners]

I believe that to be the "operating system" and that's CDFQ2A5

Send an email to support with your read and I'll get it added.

[45ANNAGT]

Eric,
I have the latest download but do not have the pats patch. You added my PC code. Thanks.

[Zerorain87]

Send an email to support with your read and I'll get it added.

Sent into support this morning, Eric.

[tokymon]

can i get this added to pats

2012 f250 6.2l op brbm283

[CamS]

Any chance you guys have done the 5.2L Voodoo PATS delete yet?

On the latest BETA, and not seeing the patch available.

TC-1791, OS FHVJ1NT

Attached a stock read

[06TrailblazerSS]

This is a Ford Racing/Whipple/Roush cal. I haven't done those yet. You can flash a stock file in, apply the patch, do the central config relearn to kill pats, then write this cal in with the pats switch set to disabled and it will work.

Any update on supporting roush? Sent in 2017 mustang roush file trying disable pats on (swapped into 66 Galaxy).


reread 2017 with beta.hpt