Newby

[Dcat]

hello everyone,

I'am new here on this forum.
I have an question about an Delco E38, is it possible to make it stand-alone.
And otherwise is it possible to make VATS, ABS, ESp, TCS and intakeflaps off?
I have no experience at all with this.

I hope someone can help me or point me in the rightway.

Thanks in advanced.

[abc]

Yes, you can use just the E38 with the min. amount of factory inputs and outputs to run an engine. Yes, you can turn off all that you mentioned. Although it's not like an aftermarket ECM that doesn't care what engine you put it on, you will need to keep the E38 within it's same family for simplicity.

[Dcat]

Yes, you can use just the E38 with the min. amount of factory inputs and outputs to run an engine. Yes, you can turn off all that you mentioned. Although it's not like an aftermarket ECM that doesn't care what engine you put it on, you will need to keep the E38 within it's same family for simplicity.

And can you do this job for me?
If needed i can send you complete read of the ecu.
kind regards

[Dcat]

Yes, you can use just the E38 with the min. amount of factory inputs and outputs to run an engine. Yes, you can turn off all that you mentioned. Although it's not like an aftermarket ECM that doesn't care what engine you put it on, you will need to keep the E38 within it's same family for simplicity.

Can you help me with this, payment is not issue or do you know somebody who could help?
Thanks in advanced

[edcmat-l1]

Can you help me with this, payment is not issue or do you know somebody who could help?
Thanks in advanced

If he can't help you out I can. I keep E38s in stock. I probably have 15 of them. As long as you can pay via paypal we're good.

[abc]

Opps, I haven't checked this thread in a while. This is just a hobby for me, I do recommend using any one of the pro's that frequent this site.

[Dcat]

Opps, I haven't checked this thread in a while. This is just a hobby for me, I do recommend using any one of the pro's that frequent this site.

Thanks for the reply!

[Dcat]

If he can't help you out I can. I keep E38s in stock. I probably have 15 of them. As long as you can pay via paypal we're good.

Hello,
so you can help me with the software to make the ecu standalone?
Kind regards

[edcmat-l1]

Yes sir. You can contact me through the email in my sig.

[Dcat]

Yes sir. You can contact me through the email in my sig.

Thanks for your reply, i have send you an email.
Kind regards

[Dcat]

Thanks for your reply, i have send you an email.
Kind regards