Hello,
After installing the long manifolds with an O2 extension, the cables fell onto the lines and melted.
Since then, I've been getting errors U0402, U0401, P0036, P00037, and P18C9.
I can't find any broken fuses or faulty wiring harnesses.
Does anyone have any ideas?
BEN le Fran?ais
Has anyone had this problem?
Last edited by shagate; 04-22-2025 at 03:16 PM.
BEN le Fran?ais
Yes. You have to repair the wires that you melted.
[email protected]
snackbartuning.com
Owner/GM Calibrator
Gen V Specialist - C7 Corvette, Gen6 Camaro & CTS-V3
It's done but the probes no longer work and I have errors on the bridge and no more meter
BEN le Fran?ais
????Originally Posted by shagate
Something must have been lost in translation.
maybe you shorted out the o2 sensors when they were melted? Or repaired the wires incorrectly or inadequately?
[email protected]
snackbartuning.com
Owner/GM Calibrator
Gen V Specialist - C7 Corvette, Gen6 Camaro & CTS-V3
I took out the 2 probes. but I no longer have a speedometer.
BEN le Fran?ais
Erreur p0502
BEN le Fran?ais
Personne n'a eu ce probleme?
BEN le Fran?ais
Reply With Quote