OSS tables description

[Joe Tcat]

I PM'd you

[LilSick]

thx for that

you know if htp has a tune depository?

[Joe Tcat]

Don't know....

[LilSick]

Joe,
If you want to do the "half a**" way, just set the table to 6500 rpms engine to all gear (do the math to enter OSS)
Dodge Boy

What other way is there?

[Joe Tcat]

Here is a snip from the one log that i had of the very first 2-3 and 3-4 WOT with the stock 1320 trans tune. It appears the OSS table didn't bother it. Great.
2-3 was 501ms and 3-4 was 205ms.

Engine torque reading feeding the HP70 trans was 630-635 ft/lb in track mode and I am guessing it was accessing the sport clutch tables and the sport torque reduction tables the latter of which are 0'd out at high load. So this is old-school just send the clutches against the full engine torque. Which aint good for longevity probably in my case making more power than stock.. .

That's the report

[LilSick]

anyone seen ole joe T?

here or elsewhere?

i miss that maniac.

this stuff (these old threads) are scary to to read

if we were this misinformed only 2.5 years ago where are we now?

wisdom is knowing i know nothing at all : )