EGR Enable not visible P59 ECU

[luckiestreet]

i downloaded the file wrote it to my pcm and i still dont have the option to enable the EGR. I have P01 ecu 2001 camaro 6.0 w BTR stage 2 NSR cam. I took the epa course and passed. Is there anything special i need to do? When i open this file it no change

[DodgeZ]

They don't let you see it in version 5. You have to use an older version that probably can't open a newer file. You need version 4.8.7 or something which you can't download anymore. So you have to hope someone on here can update your file even if you can't see it. Good luck!

[GoatCheese]

Would someone be so kind and see if they could enable egr on for me? I'm trying to get my wideband working in torque app. Thanks

[aaronc7]

Would someone be so kind and see if they could enable egr on for me? I'm trying to get my wideband working in torque app. Thanks

here ya go

[GoatCheese]

here ya go

Thank you!

[newbaufish]

I'm not sure if the base file supports the EGR, can someone verify this setting can be enabled in this tune? (changed OS due to supercharger)

[aaronc7]

I'm not sure if the base file supports the EGR, can someone verify this setting can be enabled in this tune? (changed OS due to supercharger)

try this

[newbaufish]

try this

Thank you!

[1Bad67]

It seems as though I have fallen down this rabbit hole too. Can someone please enable EGR for me.

Thanks,
Eric

[1Bad67]

Never mind. I installed an older version of VCM on another laptop and made the change.

[slarsen47]

Hi,

It has been a while since this file was enabled and I am just now getting to do some tuning after a long winter. It starts, runs and drives.

But I do not have any EGR voltage. My AEM wideband works and I have double checked my analog connections to the PCM at Red 41 and Blue 55.

Attached is the file you enabled along with a short log. Not getting any tank pressure voltage either (no fuel pressure sensor connected yet).


Nov 10 1998 Camaro with 411 PCM EGR enabled.hpt

start and run May 2 NO egr volts.hpl

[aaronc7]

quoted post was deleted so i guess ill remove this

[slarsen47]

Please.................it is Saturday morning........would like to do some tuning............can anyone check the file I posted above.......Thank you.

[aaronc7]

Please.................it is Saturday morning........would like to do some tuning............can anyone check the file I posted above.......Thank you.

try this

[slarsen47]

Thanks aaronc7.......................excellent works perfect............saved the day!

[DaveNY]

Would someone please enable the egr in this file so i can input a second wideband, thanks.
Attachment 160047

[bennort199]

Could i get someone to turn on EGR for me? I installed one to meet emissions. Would love to get tune dialed in today!
6.0 Idle VE EGR OFF.hpt

[gregstahl7]

hey you guys im having the same issue as the op with the same orginal os i upgraded to the 1 bar speed denisty os and cant reenable my egr could someone reenable able it for me please05 gmc sierra sd enhanched.hpt

[bk2life]

hey you guys im having the same issue as the op with the same orginal os i upgraded to the 1 bar speed denisty os and cant reenable my egr could someone reenable able it for me please05 gmc sierra sd enhanched.hpt

us the search feature and find the 14 page long thread for EGR...
posting on a fuel injector thread shows youre lack of comprehension

[gtstorey]

us the search feature and find the 14 page long thread for EGR...
posting on a fuel injector thread shows youre lack of comprehension

One of us in confused. This is an egr thread?