Hello everyone, these are some problems I have found in the Beta that I was hoping to get fixed. I couldn't seem to find any other way to tell Hptuners that I have found these issues. In the VCM Editor 5.1.4371 Beta, the user-defined parameters allowed addresses are set so you can't add anything. 002600 - 001000, (FFFFEA01) 00100D - 03FFFF, (03EFF3). This seems
to be an issue wth all of these OS in the Jtec Ecms. I have found in VCM editor 4.10.7 that the allowed addresses are 001006 - 03FFFF, (03EFFA), and the user-defined works completely fine. I have also found that in the beta, the GM P01 ECM seems to have an issue on multiple OS's with the allowed parameter high range in the speedo Sensor Calibration VSS Pulse Per Mile is set to low, the current allowed amount is 50,016mi-1, and on the old 4.10.7 it is 253,000mi-1. This is all I have found so far. I have tried reaching out to the support team, but it didn't lead to anything, so hopefully this gets to the right person.
Reply With Quote
