2011 ram truck norris cam tune

[TCVikingGarage]

Hey everybody I'm just learning the tuning side of things and I wanted to see if someone would be willing to look over my tune and see if I missed anything or completely screwed up on it before I write to truck. The truck is a 2011 Ram 1500 5.7. BTR truck norris cam, mopar non-mds lifters, btr pushrods and springs, shorty headers, k&N intake, and complete rebuild on the engine. Any help would be appreciated.

[TCVikingGarage]

Also forgot to mention I have the cam phaser limiter installed as well, Just figured it was a given with the cam swap.

[LilSick]

would be willing to look over my tune and see if I missed anything

that calibration is still mostly OEM

you missed almost everything i would change for a cammed start up file

let me know if you want to pay for remote help

[DodgeBoy_8HP]

Hey everybody I'm just learning the tuning side of things and I wanted to see if someone would be willing to look over my tune and see if I missed anything or completely screwed up on it before I write to truck. The truck is a 2011 Ram 1500 5.7. BTR truck norris cam, mopar non-mds lifters, btr pushrods and springs, shorty headers, k&N intake, and complete rebuild on the engine. Any help would be appreciated.

What is your email?
I can send you a suggestion there

Or, send me an email.

[TCVikingGarage]

Ok I've been playing around with this for a while now and it seems to be running pretty well but the transmission is bucking at low throttle. any ideas?

[fumanchu182]

Ok I've been playing around with this for a while now and it seems to be running pretty well but the transmission is bucking at low throttle. any ideas?

Torque convertor may not be happy, how many miles on the trans/convertor?