LML Xdf file help

[zergrush312]

Hello Everyone, I have been working on some parameters that I noticed that Efilive has access to in their editor, so I figured I'd transpose them into VCM Editor. I listed these parameters below with an example .hpt file, use them if you want. I'm looking for any info on how to make parameters 4-digit decimals on the VCM editor side, it seems to work on tunerpro, I'm also looking for someone to help me out with my Main Injection Factor Based On Mode & Stage tables, it seems like the High and low funtion is not translating to the vcm editor, the max is 4 and the minium is -4 but it will not let me go imput 4. I tried to upload the .bin example file, but it is not letting me. Sorry, new to this forum, not sure how everything works yet.

[omega_5]

Holy balls! Are you trying to get yourself banned?
https://forum.hptuners.com/showthrea...pliance-policy

I'd suggest taking those files down before the mods see them.

I'll take a look at what you're asking, but best take it to a PM.

Edit:
Your value is a signed 16 bit, with a factor of 0.0001220703
The actual range is -4 to 3.9999.

In VCM Editor, the decimal range is controlled by the Editor, not the XDF. Use the decimal set buttons to adjust as required,