Results 1 to 3 of 3

Thread: Hello i need help learning how to tune

  1. #1
    Potential Tuner
    Join Date
    May 2025
    Location
    Gardner, Massachusetts
    Posts
    2

    Talking Hello i need help learning how to tune

    I have a 2005 silverado 1500 with a lq4 swapped into it with a Madd maxx cam, melling hp, oil pump, shorty headers, the engine is only supposed to have 40k miles so i hope to have a very reliable tune and will learn fast i have a data log i will post. im very new to all this so i will need some guiding on getting accurate data.


    https://1drv.ms/u/c/3eb290165d52478f...QCCrg?e=s7rEZW
    Last edited by LsLouie; 05-31-2025 at 11:27 PM.

  2. #2
    Potential Tuner
    Join Date
    May 2025
    Location
    Gardner, Massachusetts
    Posts
    2
    im not sure why it did record and rpm or a few other things

  3. #3
    Senior Tuner
    Join Date
    Jan 2015
    Location
    Arizona
    Posts
    1,262
    Quote Originally Posted by LsLouie View Post
    I have a 2005 silverado 1500
    Hi, please start over and list the following.
    Also since you are new, do you know anything about HPtuners?
    If we start telling you things and you dont understand them, we need to know up front so we can take 'baby steps' or antying we say will be greek to you..

    The following list really helps us, help you:

    Vehicle make/model/year
    Tune and data log
    Engine/size
    Axle gear ratio / tire size
    Computer and operating system used
    Type of heads (317/243)
    Transmission
    Torque convertor stall
    intake manifold
    Intake tube / air filter
    MAP part number
    MAF part number
    Injector part number
    cam used (link to specs)
    exhaust type (long tube headers, no cats, straight piped)
    pictures of engine
    pistons
    compression
    throttle body type, size and DBW/DBC
    fuel system type, FPR, pump size, returnless or no
    ect ect