Request to Unlock Full VCT Tables for Mapped Point 5 ? 2019 F-150 3.5L EcoBoost

[BonnieClydeRacing]

Hey HP Tuners Support,

I?m working on a 2019 Ford F-150 3.5L EcoBoost and need access to the full VCT tables ? specifically the Mapped Point 5 cam angle tables (both intake and exhaust).

Details:
? VIN: 1FTEW1E41KFB59132
? OS ID: PKHJAD3
? ECM: TC-277 (2017+ Ford)
? Serial: 784401879069
? Platform: HP Tuners VCM Suite

I?m building a spark-only ghost cam tune and have confirmed that Mapped Point 5 is triggered in Tow/Haul mode via datalogging. I'm requesting access to the following tables in Mapped Point 5:

VCT Intake Cam Angle vs RPM/Load

VCT Exhaust Cam Angle vs RPM/Load

I?m using a combination of transient spark swing, cylinder offset, and tip-in to achieve the chop, but cam phasing would allow me to complete the effect properly.

.HPT and .HPL files can be provided if needed.

Thank you ? let me know if anything else is required.

? John @ BCR Tuning

[F150Farmer]

There is not table like that for single MPs. Read through this post about how they work.

https://forum.hptuners.com/showthrea...ce-Tables-Work