Ford injector data to GM format conversion spreadsheet

[nathanhine1977]

https://drive.google.com/drive/folde...a9?usp=sharing

tune file

[nathanhine1977]

tune file18th April 2020 last good file.hpt

[Cooper.willey]

Please forgive my ignorance here but I am trying to plug in my data for some Ford injectors using your spreadsheet. It is an awesome tool that looks like you spent a lot of time building. We thank you for sharing it. I am trying to plug in my data for some 34 lb/hr Ford injectors in a sand car, 6.0L Ls2. Previous owner installed these injectors and never changed any of the offsets, Flow Rate or min inj PW. Injectors are Bosch 0280158227.I have the high slope and low slope but I dont know how to get the ALOSL and AHISL. We interpolated the offsets using the data we found on efidynotuning.com. I think we did pretty good for guessing at it because the engine ran much better afterwards. I would just like to verify if the offsets are correct and would also like to find out what the min pulse width is. Very Rich at idle. Open Loop VE tune, no MAF, No O2's.

FRPP 34 lb/hr @ 55psi
LU34A
Bosch 0280158227 35 lb/hr
Stock 2011-2013 Mustang 5L
Low Slope 46.325
High Slope 40.556
Breakpoint 0.0000128491

VOLTAGE OFFSET
voltage ms
16.00 0.846
15.00 0.846
14.00 0.932
13.00 1.060
12.00 1.198
11.00 1.371
10.00 1.600
8.00 2.347
6.00 4.915
0.00 4.915
0.00 4.915
0.00 4.915

Did you end up finding out ALOSL and AHISL?

[mychevyisntheavy]

im running the same injectors in my gen3 p01. here is my tune. is it set correctly? main.tune. 2003.5.7.4l80e.862.3.42.hpt and thanks for helping out. if this helps others im glad to help