4l80 h2 segment swap help

[noillidpc]

hello im fairly new at this i have a customer that brought me there modified 2006 h2 hummer that is supercharged and has all ready been tuned at some point. the customer had swapped in a 4l80 in the truck and i had installed the swap harness into it and im struggling to find a tune to segment swap the pcm. im hoping someone can point me in the right direction thanks in advance. 06 hummer supercharged white stock file 6.0.hpt

[2xLS1]

That has had a COS applied to it. You would have to have the original OS file to segment swat a 4L80 segment into it. There are 4L80 segments available for the original OS.

[noillidpc]

thanks for the info. to help my knowledge what is a COS thanks again.

[noillidpc]

So upon talking with the customer he purchesed the vehicle modified and has no info on who tuned it in the first place so if i cant get the stock file what do i do at that point ?

[gtstorey]

One option would be to reprogram the module to stock with TDS outside of HPT. Not saying this is the only option though.

[2xLS1]

Custom Operating System. With such little knowledge about tuning you should probably just get the adapter that lets you run a 4L80 with 4L60 segments.

[Pulse_GTO]

Here is the file you posted with the transmission and transmission diagnostic segments swapped over to those for a 2006 K2500 HD LQ9 with a 4L80E. I would also internet search the VIN and pull up the sales ad. The ad mentions that the vehicle runs on E85, but the tune is not set up for a flex fuel sensor and the Stoich AFR table is still 14.68 across the board.