VCM Scanner Beta - CAN Outputs feature?

[NobleTech]

I have nothing on the CAN from the output of the ProLink, so, as I read, I need to get the M8 connector and pin it to the CAN BUS, not the ProLink?

https://photos.app.goo.gl/s4Qd8pngs418anAA6

https://photos.app.goo.gl/MWnmVpPeuPBiPmAe6

[NobleTech]

Here are two videos of the Oscilloscope, with a wideband transmitting out to the BUS, one video with the prolink disconnected and the other with it connected

https://photos.app.goo.gl/GGcntK49WjFTjhY26

https://photos.app.goo.gl/r21cUkpvKbkjFDrKA