Added a supercharger to my jeep with 4.0. I'm trying to dial in the fuelling for the most part but getting some funky stuff. Not only is fuel not finding a spot between lean and rich in closed loop but the "Barometric Pressure" is reading half the value as it usually does. When I throttle the rpm of course increases but then goes down to 400-500 rpm and feels like stalling then it corrects itself. Ive attached my tune and log idling.97JeepGCManV7 SC DFCO OFF CLOSED LOOP Fuel V7 and Timing V2.hptSC no surging running normal just idle 5 Fuel 7 MAP Scale 244.hpl